The SorbOx are for smaller domestic systems and comes in two sizes, Li which caters for systems up to 30kW or 800 litres of circulating water, or the Si, for systems up to 20kW or 300 litres of circulating water.
These units Continuously removes lime, rust & gases from the heating system water to ensure economic and reliable heating
There are two options with the cartridges, if you have an existing system that you don’t want to fully drain, then fit the Demineralisation cartridge and let the system run, after about a week change the cartridge to the
To remove lime and salts from the water, install the PUROTAP® demineralisation cartridge. It will absorb all dissolved minerals from the loop water within a few hours of circulation. Thus, the formation of lime scale is prevented and the corrosion rate is decreased
The SorbOx® filter housing separates rust and sludge from the water without clogging. A strong magnet underneath the housing and natural gravity, retain sludge and rust particles in the filter housing. For cleaning the filter simply close the valves, unscrew and rinse the housing.
For degassing the water, run the ELYSATOR® unit. The anodic system removes corrosive gases by en electrochemical reaction with the sacrificial anode. Microbubbles are separated, collected and automatically vented